Guntec USA products will require 2-3 business days to be fulfilled.

  • AR15 HANDGUARD REMOVAL TOOL

    AR15 HANDGUARD REMOVAL TOOL

     

    • Heat Treated Steel
    • Silicon Plastic Protection Where The Tool Holds The Delta Ring Bag
    • Bottom Hook End Goes Into Magwell, While Squeezing The Delta Ring Back, Then Handguards Can Be Removed
    • Black

     

     

    $5.00
  • AR15 A1/A2 FRONT SIGHT TOOL

    AR15 A1/A2 FRONT SIGHT TOOL

     

    • Steel
    • Works On A1 / A2 Front Sight Posts
    • 4 Prong / 5 Prong

     

     

    $8.00
  • AR15 A1/A2 EXTENDED LENGTH FRONT SIGHT TOOL

    AR15 A1/A2 EXTENDED LENGTH FRONT SIGHT TOOL

     

    • High quality steel construction
    • Extended Length
    • Matte Black finish
    • Adjusts 4 or 5 prong sight posts
    • Length: 2.6875″

     

    $8.00
  • AR15 HOLLOW ROLL PIN STARTER PUNCH SETAR15 HOLLOW ROLL PIN STARTER PUNCH SET

    AR15 HOLLOW ROLL PIN STARTER PUNCH SET

     

    • Heat Treated Steel
    • Four Piece Set
    • All Sizes Needed To Complete A Build
    • Brand New

     

     

     

    $12.00
  • AR15 ARMORER'S GUN CLEANING/ASSEMBLY MAT

    AR15 ARMORER’S GUN CLEANING/ASSEMBLY MAT

     

    • Desert Tan Color
    • White Outline Of AR15 
    • 36″ X 15 “
    • All AR15/M4 Parts Labeled
    • Neoprene Material
    • Material Absorbs Oil, Solvents, Etc..

     

     

     

     

    $15.00
  • AR15 LOWER RECEIVER VISE BLOCK (GEN 2 )

    AR15 LOWER RECEIVER VISE BLOCK (GEN 2 )

     

    •  Zytel Composite Polymer
    • Locks into Magwell
    • GEN 2 Reinforced Design
    • Fits Any Lower Receiver in .223/5.56
    • Will Not Fit .308 Lower Receivers

     

    $15.00
  • AR .308/ 5.56 CAL ARMORER’S COMBO WRENCH

     

    • Heat Treated Steel
    • Slot For Torque Wrench
    • Works With 5.56 or .308 Cal Jam Nuts On Free Floating Handguards
    • Also Work With 5.56 and .308 Cal Barrel Nuts (BA78, CK308 SERIES HANDGUARDS)
    • Helps With Installing 5.56 or .308 Cal Muzzle Devices
    • Installs Free Float Barrel Nuts in 5.56 or .308 Cal
    • Groove to Tighten Castle Nuts
    • The 2 Middle “U” Cutouts Are Designed For Tightening Down Barrel Nuts by Hand (30 ft lbs) that Come With Our US Made Handguards (JK NUT) (JK SERIES, MLK SERIES, ETC.. IN 5.56 & .308 CALIBERS)
    • All In One Tool To Completely Take Down/ Disassemble

     

     

     

    $15.00
  • AR15 UPPER RECEIVER VISE BLOCKAR15 UPPER RECEIVER VISE BLOCK

    AR15 UPPER RECEIVER VISE BLOCK

     

    • Polymer
    • Two Piece Unit
    • Fits A2 / A3 Receivers
    • Durable 
    • Does Not Work With 308 Cal Receivers

     

     

    $20.00
  • AR15 ROLL PIN FINISHING PUNCH SETAR15 ROLL PIN FINISHING PUNCH SET

    AR15 ROLL PIN FINISHING PUNCH SET

     

    • Heat Treated Steel
    • Four Piece Set, Sizes Include: 1/16″ , 3/32″ , 1/8″ , & 5/32″ 
    • All Sizes Needed To Complete A Build
    • Helps Start/Finish Roll Pins Without Damage
    • Shorter Shaft Starter Punch Gives You More Control By Putting Your Hand Closer To the Pin, And Keeps User From Bending Roll Pins
    • Brand New

     

     

     

    $20.00
  • AR15 ARMORER'S COMBINATION WRENCHAR15 ARMORER'S COMBINATION WRENCH

    AR15 ARMORER’S COMBINATION WRENCH

     

    • Heat Treated Steel
    • Patented Design
    • All In One Tool To Completely Take Down/ Disassemble
    • Laser Etched Marking for Authentication

     

     

     

    $25.00
  • AR15 VISE BLOCK SETAR15 VISE BLOCK SET

    AR15 VISE BLOCK SET

     

    • Polymer
    • Lower Vise Locks into Magwell
    • Fits Any Lower Receiver in .223/5.56
    • Will Not Fit .308 Lower Receivers
    • Upper Vise Block Fits Both A2/A3 .223 Receivers

     

    $30.00
  • AR15 / AR.308 ARMORER'S COMBINATION WRENCH (GEN 2)AR15 / AR.308 ARMORER'S COMBINATION WRENCH (GEN 2)

    AR15 / AR.308 ARMORER’S COMBINATION WRENCH (GEN 2)

     

    • Heat Treated Steel
    • Gen 2 Complete Armoers Wrench
    • All In One Tool To Completely Take Down/ Disassemble
    • 5.56 On One End/ .308 Cal Applications On The Other
    • Multiple Applications For Installing Or Adjusting:  Handguard Barrel Nuts (ULTRALIGHT/AIRLITE SERIES), Castle Nuts, Mil Spec Barrel Nuts, Flash Hiders, Muzzlebrakes, Etc…
    • Just Released!!

     

     

     

    $30.00
  • AR15 DELUXE ARMORERS TOOL KIT

     

    • Deluxe Armorers Tool Kit
    • Kit Includes All The Tools Necessary To Build A Complete Rifle
    • 8 Pieces In The Kit
    • Kit Contains : Guntec Usa Armorer's Wrench, Upper Receiver Vise Block, Lower Receiver Vise Block, Carbon Scraper, Front Sight Tool, Handguard Removal Tool, Rubber Receiver Wedgie, & A Four Piece Hollow Starter Pin Punch Set
    • All In One Package

     

    $85.00